|
|
 The
Structural Beam Fabrication Line produces structural straight,
tapered and "I" section steel beams. The Structural Beam Fabrication
Line consists of Automatic Welding System Model AWM-102 Welder, Seam
Welder, Tacking Fixture and conveyor sections. Work is fed through
the stationary Welder, where horizontal web and vertical flanges are
solidly and accurately positioned, guided and simultaneously welded
with one pass of submerged arc from the same side of the web. Due to
absence of relative detrimental motion of the welding nozzles,
welder provides uniform welds of quality, demanded by construction
codes and used in pre-engineered steel buildings. |
|
| Upon
starting, welder goes in to automatic mode, when sequence of
operation, and welding parameters are controlled by PLC.
High-quality welds, even at
high speeds.
We've made speed and quality
compatible through an exclusive fixturing system that assures
accurate orientation and eliminates time-consuming manual clamping
operations. Located before the main welder and resting on a firm
foundation, our stationary fixture positions the web and flanges
accurately and solidly. The leading edge of the beam is oriented and
clamped automatically. A tacking fixture positions this edge
vertically and horizontally, then squeezes the components together
for a manual tack weld. After the manual tack weld, the joined web
and flanges are moved by a power conveyor to the main
welder.
|
|
