|
The tube or pipe length capacity is unlimited, allowing you to
use longer lengths with fewer joints.
That means another saving on labor and material costs required to
join sections.
It's the ideal bending machine for prototype departments, small
machine shops, and operations where cost is a factor and when only a
few bends are needed per piece.
- RELIABLE PERFORMANCE
Few moving parts, all mechanical
operation.
- HIGHLY MOBILE
These light-weight machines can be set-up
anywhere. There is no electrical or hydraulic hook-up required.
- COMPACT SIZE
Less than 4 sq. FT. (1.1m2) of bench space
required.
- PRECISE BENDS
The DOB dial, in 1o increments, permits
accurate bends within 1o.
- REVERSIBLE DIRECTION
You can bend clockwise and
counter-clockwise, permitting the production of complex parts
(Model 4 10).
Return to
Top
 MODEL 411
A bench-mounted machine for economical bends of tube up to 1" OD
and pipe 1/2" IPS
PHI's draw bending machines let you bend pipe and tube at
extremely low cost. When you only need to make one or two bends per
piece, you can save time and energy by using these efficient
bench-mounted manual machines.
The compact design permits a great deal of mobility, as well as
flexibility of location. They're light-weight and require less than
four square feet of bench space-including the bend arm sweep.
The tube or pipe length capacity is unlimited, allowing you to
use longer lengths with fewer joints. That means another saving on
labor and material costs required to join sections.
Both 410 and 411 models give you precision bends with minimal
wall thinning and ovality, particularly when optional mandrels are
used. It's the ideal bending machine for prototype departments,
small machine shops, and operations where cost is a factor and when
only a few bends are needed per piece.
- RELIABLE PERFORMANCE:
Few moving parts, all mechanical
operation.
- HIGHLY MOBILE
These lightweight machines can be set-up
anywhere. There is no electrical or hydraulic hook-up required.
- COMPACT SIZE
Less than 4 sqft (1.1m2) of bench space
required.
- PRECISE BENDS:
The DOB dial. in 1o increments, permits
accurate bends within 1o.
Return to
Top
 MODEL 420 PRECISION BENDING
MACHINE
Designed and engineered especially for the needs of aircraft
maintenance crews.
Our Model 420 is a totally flexible and precise manually-operated
"draw" or "rotary die" type machine. It has a special gear-operated
bend arm that will increase leverage 4 to 1 when bending heavier
tubes. The bender head is bolted to a base plate which is mounted on
a tooling storage cabinet. The Model 420 is reversible and may be
set up for either right or left hand bending. Since it requires no
outside power source, your maintenance team can now make precise and
accurate bends anywhere in the field.
Return to
Top
 | 
MODEL