|
 Models M343 and M369
Flanging Machines cold-form pipe ends to a 90º flange. The machines
are simple in design and simple to operate. Skilled labor is not
needed to operate the machine, nor to bolt the flanges together -
entirely eliminating the need for skilled labor in joining pipe
sections.
A complete tooling change can be performed in just minutes. Once
the pipe is in place, the flange is formed in minutes. The whole
operation -- install tooling (if required), insert pipe, form the
flange, remove the pipe - requires a maximum of 5 minutes, This
compares favorably to the approximately 45 minutes required to weld
a flange onto the pipe.
|
|
