|
 PHI Tube End Finishing machines
models 2C, 2CP, 2CPV, 3CPV and
8CPV form a
family of machines for preparing the ends of tube or pipe for
joining with other tube or pipe sections, valves, T joints or
machinery.
The ends can be prepared with a bead or
flare, or
simply deburred and squared. Each machine is capable of performing
all of these functions; a change of tooling is all that is required
to switch from one function to another.
PHI Tube End Finishing machines models 2C, 2CP and 2CPV are designed for smaller diameter tubes
and pipe (see Specifications below). Model 2C features manual
clamping for easy-to-form materials and low production rates and
more difficult-to-form materials. Both models have two-speed
spindles allowing you to choose the capacities are the same as the
2CP. In addition, the 2CPV has a variable speed drive (0 to 2000
RPM) with a 3/4 HP motor and digital RPM readout. |
|
