(626) 968-9680
| | Print | |
PHI Tube End-Finishing Machines -- Models to Tackle Any TaskPHI Tube End-Finishing Machines Models 2C, 2CP, 2CPV, 3CPV and 8CPV form a family of machines for preparing the ends of tube or pipe for joining with other tube or pipe sections, valves, T-joints or machinery. Capabilities of PHI Tube End-Finishing MachinesUsing PHI's tube end-finishing machines, the ends can be prepared with a bead or flare, or simply deburred and squared. Each machine is capable of performing all of these functions -- a change of tooling is all that is required to switch from one function to another.PHI Tube End-Finishing Machines -- Models 2C, 2CP and 2CPVModels 2C, 2CP and 2CPV are designed for smaller diameter tubes and pipes. Model 2C features manual clamping for easy-to-form materials and low production requirements. Model 2CP has air-cylinder clamping for higher production rates and more difficult-to-form materials.for more difficult-to-form materials. Both models (2C and 2CP) have two-speed spindles, allowing you to choose the most efficient speed for the function you are performing.
The 2CPV capacities are the same as the 2CP. In addition, the 2CPV has a variable speed drive (zero to 2,000 RPM) with a 3/4 HP motor and a digital RPM readout.  Specifications
|
|||||||||||||||||||||